Indoor Growing
Even if you haven't had any prior experience with growing
plants in your home, you can have a successful crop of marijuana by
following the simple directions here. If you have had
problems in the past with marijuana cultivation, you may find the
solutions in the following chapters. Growing a marijuana plant
involves four basic steps:
- Get the ganja seeds. If you don't already have some, you can ask
you friends to save you ganja seeds out of any good grass they may
come across. You'll find that lots of people already have a
seed collection of some sort and are willing to part with a
few prime ganja seeds in exchange for some of the finished
product.
- Germinate the ganja seeds. You can simply drop a ganja seed into moist
soil, but by germinating the ganja seeds first you can be sure
that the ganja seed will indeed produce a plant. To germinate
ganja seeds, place a group of them between about six moist paper
towels, or in the pores of a moist sponge. Leave the towels
or sponge moist but not soaking wet. Some ganja seeds will
germinate in 24 hours while others may take several days or
even a week.
- Plant the sprouts. As soon as a ganja seed cracks open and begins
to sprout, place it on some moist soil and sprinkle a little
soil over the top of it.
- Supply the plants with light. Flourescent lights are the
best. Hang the lights with two inches of the soil and after
the plants appear above the ground, continue to keep the
lights with two inches of the plants. It is as easy as
that. If you follow those four steps you will grow a
marijuana plant. To ensure prime quality and the highest
yield in the shortest time period, however, a few details
are necessary.
Your prime concern, after choosing high quality ganja seeds, is
the soil. Use the best soil you can get. Scrimping on the soil
doesn't pay off in the long run. If you use unsterilized soil
you will almost certainly find parasites in it, probably after it
is too late to transplant your marijuana. You can find excellent
soil for sale at your local plant shop or nursery, K-Mart, Wal
Mart, and even some grocery stores. The soil you use should have
these properties for the best possible results:
- It should drain well. That is, it should have some sand in
it and also some sponge rock or pearlite.
- The pH should be between 6.5 and 7.5 since marijuana does
not do well in acidic soil. High acidity in soil encourages
the plant to be predominantly male, an undesirable trait.
- The soil should also contain humus for retaining moisture
and nutrients.
If you want to make your own soil mixture, you can use this
recipe: Mix two parts moss with one part sand and one part
pearlite or sponge rock to each four gallons of soil. Test your
soil for ph with litmus paper or with a soil testing kit
available at most plant stores. To raise the ph of the soil, add
1/2 lb. lime to 1 cubic foot of soil to raise the ph one point.
If you absolutely insist on using dirt you dug up from your
driveway, you must sterilize it by baking it in your oven for
about an hour at 250 degrees. Be sure to moisten it thoroughly
first and also prepare yourself for a rapid evacuation of your
kitchen because that hot soil is going to stink. Now add to the
mixture about one tablespoon of ganja fertilizer (like Rapid-Gro) per
gallon of soil and blend it in thoroughly. Better yet,
just skip the whole process and spend a couple bucks on some
soil.
Info about marijuana containers
After you have prepared your soil, you will have to come up
with some kind of container to plant in. The container should be
sterilized as well, especially if they have been used previously
for growing other plants. The size of the container has a great
deal to do with the rate of growth and overall size of the plant.
You should plan on transplanting your plant not more than one
time, since the process of transplanting can be a shock to the
plant and it will have to undergo a recovery period in which
growth is slowed or even stopped for a short while. The first
container you use should be no larger than six inches in diameter
and can be made of clay or plastic. To transplant, simply
prepare the larger pot by filling it with soil and scooping out a
little hole about the size of the smaller pot that the plant is
in. Turn the plant upside down, pot and all, and tap the rim of
the pot sharply on a counter or the edge of the sink. The soil
and root ball should come out of the pot cleanly with the soil
retaining the shape of the pot and with no disturbances to the
root ball. Another method that can bypass the transplanting
problem is using a Jiffy-Pot. Jiffy pots are made of compressed
peat moss and can be planted right into moist soil where they
decompose and allow the passage of the root system through their
walls. The second container should have a volume of at least
three gallons. Marijuana doesn't like to have its roots bound or
cramped for space, so always be sure that the container you use
will be deep enough for your plant's root system. It is very
difficult to transplant a five-foot marijuana tree, so plan
ahead. It is going to get bigger. The small plants should be
ready to transplant into their permanent homes in about two
weeks. Keep a close watch on them after the first week or so and
avoid root binding at all costs since the plants never seem to do
as well once they have been stunted by the cramping of their
roots.
Facts about ganja ganja fertilizer
Marijuana likes lots of food, but you can do damage to the
plants if you are too zealous. Some ganja fertilizers can burn a plant
and damage its roots if used in to high a concentration. Most
commercial soil will have enough nutrients in it to sustain the
plant for about three weeks of growth so you don't need to worry
about feeding your plant until the end of the third week. The
most important thing to remember is to introduce the ganja fertilizer
concentration to the plant gradually. Start with a fairly
diluted ganja fertilizer solution and gradually increase the dosage.
There are several good marijuana ganja fertilizers on the commercial
market, two of which are Rapid-Gro and Eco-Grow. Rapid-Gro has
had widespread use in marijuana cultivation and is available in
most parts of the United States. Eco-Grow is also especially
good for marijuana since it contains an ingredient that keeps the
soil from becoming acid. Most ganja fertilizers cause a pH change in
the soil. Adding ganja fertilizer to the soil almost always results in
a more acidic pH.
As time goes on, the amount of salts produced by the
breakdown of ganja fertilizers in the soil causes the soil to become
increasingly acidic and eventually the concentration of these
salts in the soil will stunt the plant and cause browning out of
the foliage. Also, as the plant gets older its roots become less
effective in bringing food to the leaves. To avoid the
accumulation of these salts in your soil and to ensure that your
plant is getting all of the food it needs you can begin leaf
feeding your plant at the age of about 1.5 months. Dissolve the
ganja fertilizer in worm water and spray the mixture directly onto the
foliage. The leaves absorb the ganja fertilizer into their veins. If
you want to continue to put ganja fertilizer into the soil as well as
leaf feeding, be sure not to overdose your plants.
Remember to increase the amount of food your plant receives
gradually. Marijuana seems to be able to take as much ganja fertilizer
as you want to give it as long as it is introduced over a period
of time. During the first three months or so, fertilize your
plants every few days. As the rate of foliage growth slows down
in the plant's preparation for blooming and ganja seed production, the
ganja fertilizer intake of the plant should be slowed down as well.
Never fertilize the plant just before you are going to harvest it
since the ganja fertilizer will encourage foliage production and slow
down resin production. A word here about the most organic of
ganja fertilizers: worm castings. As you may know, worms are raised
commercially for sale to gardeners. The breeders put the worms
in organic compost mixtures and while the worms are reproducing
they eat the organic matter and expel some of the best marijuana
food around. After the worms have eaten all the organic matter
in the compost, they are removed and sold and the remains are
then sold as worm castings. These castings are so rich that you
can grow marijuana in straight worm castings. This isn't really
necessary however, and it is somewhat impractical since the
castings are very expensive. If you can afford them you can,
however, blend them in with your soil and they will make a very
good organic ganja fertilizer.
Very important info about light for weed
Without light, the plants cannot grow. In the countries in
which marijuana grows best, the sun is the source of light. The
amount of light and the length of the growing season in these
countries results in huge tree-like plants. In most parts of
North America, however, the sun is not generally intense enough
for long enough periods of time to produce the same size and
quality of plants that grow with ease in Latin America and other
tropical countries. The answer to the problem of lack of sun,
especially in the winter months, shortness of the growing season,
and other problems is to grow indoor under simulated conditions.
The rule of thumb seems to be the more light, the better. In one
experiment we know of, eight eight-foot VHO Gro-Lux fixtures were
used over eight plants. The plants grew at an astonishing rate.
The lights had to be raised every day. There are many types of
artificial light and all of them do different things to your
plants. The common incandescent light bulb emits some of the
frequencies of light the plant can use, but it also emits a high
percentage of far red and infra-red light which cause the plant
to concentrate its growth on the stem. This results in the plant
stretching toward the light bulb until it becomes so tall and
spindly that it just weakly topples over. There are several
brands of bulb type. One is the incandescent plant spot light
which emits higher amounts of red and blue light than the common
light bulb. It is an improvement, but has it drawbacks. it is
hot, for example, and cannot be placed close to the plants. Consequently, the plant has to stretch upwards again and is in
danger of becoming elongated and falling over. The red bands of
light seem to encourage stem growth which is not desirable in
growing marijuana. the idea is to encourage foliage growth for
obvious reasons. Gro-Lux lights are probably the most common
flourescent plant lights. In our experience with them, they have
proven themselves to be extremely effective. They range in size
from one to eight feet in length so you can set up a growing room
in a closet or a warehouse. There are two types of Gro-Lux
lights: The standard and the wide spectrum. They can be used in
conjunction with on another, but the wide spectrum lights are not
sufficient on their own. The wide spectrum lights were designed
as a supplementary light source and are cheaper than the standard
lights. Wide spectrum lights emit the same bands of light as the
standard but the standard emit higher concentrations of red and
blue bands that the plants need to grow. The wide spectrum
lights also emit infra-red, the effect of which on stem growth we
have already discussed. If you are planning to grow on a large
scale, you might be interested to know that the regular
flourescent lamps and fixtures, the type that are used in
commercial lighting, work well when used along with standard Gro-
Lux lights. These commercial lights are called cool whites, and
are the cheapest of the flourescent lights we have mentioned.
They emit as much blue light as the Gro-Lux standards and the
blue light is what the plants use in foliage growth.
Now we come to the question of intensity. Both the standard
and wide spectrum lamps come in three intensities: regular
output, high output, and very high output. You can grow a nice
crop of plants under the regular output lamps and probably be
quite satisfied with our results. The difference in using the HO
or VHO lamps is the time it takes to grow a crop. Under a VHO
lamp, the plants grow at a rate that is about three times the
rate at which they grow under the standard lamps. People have
been known to get a plant that is four feet tall in two months
under one of these lights. Under the VHO lights, one may have to
raise the lights every day which means a growth rate of ate least
two inches a day. The only drawback is the expense of the VHO
lamps and fixtures. The VHO lamps and fixtures are almost twice
the price of the standard. If you are interested in our opinion,
they are well worth it. Now that you have your lights up, you
might be curious about the amount of light to give you plants per
day. The maturation date of your plants is dependent on how much
light they receive per day. The longer the dark period per day,
the sooner the plant will bloom. Generally speaking, the less
dark per day the better during the first six months of the
plant's life. The older the plant is before it blooms and goes
to ganja seed, the better the grass will be. After the plant is
allowed to bloom, its metabolic rate is slowed so that the
plant's quality does not increase with the age at the same rate
it did before it bloomed. The idea, then, is to let the plant
get as old as possible before allowing it to mature so that the
potency will be a high as possible at the time of harvest. One
relatively sure way to keep your plants from blooming until you
are ready for them is to leave the lights on all the time.
Occasionally a plant will go ahead and bloom anyway, but it is
the exception rather than the rule. If your plants receive 12
hours of light per day they will probably mature in 2 to 2.5
months. If they get 16 hours of light per day they will probably
be blooming in 3.5 to 4 months. With 18 hours of light per day,
they will flower in 4.5 to 5 months. Its a good idea to put your
lights on a timer to ensure that the amount of light received
each day remains constant. A "vacation" timer, normally used to
make it look like you are home while you are away, works nicely
and can be found at most hardware or discount stores.
Energy Emissions In Arbitrary Color Bands
40 Watt Flourescent Lamps
In Watts and Percent of Total Emissions
|
|---|
| | Daylight |
Cool White |
Gro-Lux |
GroLux WS
|
|---|
| Light Type |
Band | Watts |
% | Watts |
% | Watts |
% | Watts |
%
|
|---|
| Ultra-Violet |
-380 | 0.186 |
2.15 | 0.16 |
1.68 | 0.10 |
1.42 | 0.27 |
3.16
|
| Violet |
380-430 |
0.832 | 9.60 |
0.72 | 7.57 |
0.70 | 9.67 |
1.07 | 12.48
|
| Blue |
430-490 |
2.418 | 27.91 |
1.98 | 20.78 |
1.96 | 27.07 |
1.22 | 14.29
|
| Green |
490-560 |
2.372 | 27.38 |
2.35 | 24.67 |
1.02 | 14.02 |
1.24 | 14.49
|
| Yellow |
560-590 |
1.259 | 14.53 |
1.74 | 18.27 |
0.10 | 1.42 |
0.83 | 9.77
|
| Orange |
590-630 |
1.144 | 13.21 |
1.69 | 17.75 |
0.44 | 6.05 |
1.36 | 15.93
|
| Red |
630-700 |
0.452 | 6.22 |
0.81 | 8.47 |
2.86 | 39.55 |
1.86 | 21.78
|
| Far Red |
700-780 |
0.130 | 1.53 |
0.07 | 0.81 |
0.06 | 0.80 |
0.69 | 8.10
|
| Total |
8.890 | 100.0 |
9.52 | 100.0 |
7.24 | 100.0 |
8.54 | 100.0
|
|---|
Page 2